605+ Cannabis Strains over 20 Breeders worldwide.

Toll Free: +1 (800) 805-7835

Cannabis Leaves Turning Yellow: Reasons and What to Do

Cannabis leaves turning yellow is possibly one of the most common problems when growing cannabis plants. It is equitably the same when growing other potted plants. There are ups and downs. Though in general, one green leaf turning yellow isn’t a worry. However, when a couple more gradually follows until nearly all leaves are yellow, then there must be something needed to be done. If cannabis leaves turning yellow is your problem, you are required to do a necessary check-up and tracing. 

To start with, there are different angles to look into why your cannabis leaves have turned yellow. As you have discerned, cannabis plants are highly sensitive plants. Whatever you gave them, they react immensely to it. When you see your leaves becoming yellow, there’s no need to panic. A clear head is needed to get to know the main source of this. It is fortunate that after years of cultivation, cannabis growers have accumulated information on how to suitably take care of your plant and save them when they turn to deteriorate. 

There’s no call to panic if it’s your first time growing your cannabis plant. There is no such point as perfect growth, but when problems arise, there are the most suitable solutions provided to keep you going. Cannabis leaves turning yellow isn’t something to get miserable about. Know the reasons and learn what you can do to respond to the problem well. 

Yellow Cannabis Leaves – How Science See it

You may have learned about the plant’s structure and growth when you were in middle school. Your Biology teacher must have explained it further. But to give you a little review, your cannabis leaving turning yellow has a scientific explanation behind it. 

You might remember that a leaf is made of different plant cells. These different plant cells are from organelles named chloroplast. The job of the chloroplast is for photosynthesis.  Inside the chloroplast is the chlorophyll which is mainly color green. Other nondominant colors will include yellow and orange carotenoids. The main job of the chlorophyll is to absorb light and heat from the sun. Through photosynthesis, the light is turned into sugar, which is then used for the plant’s growth. 

If the plants are healthy and strong, chlorophyll will increase making the leaves green and lush, however, when the plant is stressed out, the chlorophyll will decrease leaving the yellow and orange carotenoids behind. Thus, the yellow or orange color of the cannabis leaves. Therefore, it is concluded that a stress-free plant grows well compared to an unhealthy and stressed cannabis plant.

Accurate Investigation 

The best thing to do is give an accurate and thorough investigation of your cannabis leaves turning yellow. First, if there are only a couple, say two or three leaves turning yellow, there is no need to panic. Simply pluck the leaves off or get scissors. You wouldn’t want to let the yellow leaves stay on your plant.  But if you see most of the leaves turning yellow or starting to run yellow, put the scissors down and investigate. There can be several causes of why this happened. 

One point to consider is the life cycle of the cannabis plant. A few cannabis leaves turning yellow in the flowering stage is normal because this is when the plant continues to grow new leaves each day. Thus, the old leaves wither and may die. This usually happens during the final week of the flowering stage. This is likewise the same when the plant is nearing harvest time. Because there is no need to continue the nutrients, most cannabis leaves will turn yellow. 

However, if the following factors don’t meet the situation of your plant, then it’s time to know the causes of your cannabis leaves turning yellow and see how you can fix it.

Reasons and Solutions for Cannabis Leaves Turning Yellow

Most of the cannabis growers experienced noticing their cannabis leaves turning yellow, and the reasons depend entirely on different options. Know the possible reasons and how to solve them right away. 

Nitrogen Deficiency

Your cannabis plants will need nutrients, especially nitrogen to help it develop well and healthy. Get a close observation at the cannabis plant. If you detect yellow leaves mainly at the base on the plant and near the roots, then this may be the crisis. These yellow leaves are loose and soft to pluck. This is caused by the depletion of nutrients and not sufficient nitrogen absorbed from the soil. If you forgo spraying any cannabis nutrients, chances are, the leaves may turn yellow. 

The good message is, it is simple to fix. Transfer the plant to a new pot with wholesome and healthy soil, then go to the shop and acquire organic nitrogen and nutrients to get the required supplements for the plant. Observe it for a few days and see if the leaves stopped turning yellow.

When it likewise comes to nutrients, you will likewise need to constantly check the amount of pH level. Get a pH level test kit. The pH level of the soil must be around six to seven ph. Once they go over or beyond, the leaves will look burnt and discolored.

Overwatering or Underwatering

This mistake is mostly done by beginner growers who have no idea of the proper way to water cannabis plants. Since cannabis plants are special plants, they likewise need a special way of watering. Cannabis plants don’t need a lot of water. You will need the right amount of water to keep the soil moist and damp, and not dripping wet. Check the topsoil now and then, if it is still moist, consider watering a few hours later. Let the roots absorb all the moisture before watering again. 

You can use a container with holes on the base so water can drip into them. You don’t need bigger pots. Use the one that cannabis can fit perfectly. Additionally, if your plant is still smaller, they won’t need too much water. Use this to test your plant; when your plant bow while you water them, it means you are overwatering and when your plant perks up after watering, it means you are underwatering it.

Light Burn 

When the yellow leaves are in the top of the plant, or closer to the source of light, then the reason for your cannabis leaves turning yellow might be light burn. When your cannabis plants get too close to the light, it may burn the leaves causing it to turn yellow. 

Move your light farther away, maybe more than four inches or so away from the plants. You can put the plant in a clear glass to avoid too much light and harm the plant. This is better especially if you use LED.

Pests and Bugs

The deadliest enemies of the cannabis plant are the pests and bugs. They seem to appear out of nowhere and before you know it, your plants are already infected. Though some of them are easy to find and get because of the marks they leave behind, but some disappear and come back. The primary causes of these might be the bad airflow, uncleaned growing space, and overwatering.  

Since there are different kinds of cannabis pests and bugs, you need to identify them first to get rid of them. You can use organic insecticides or carefully removed the pests and bugs and throw them out. Check your growing spaces for any small holes. When you check them, make sure you are also clean and free of any dirt.


It always comes to a point where cannabis leaves turning yellow isn’t something to be scared about. The different solutions will help you keep your plants safe and healthy again. It could be hard to prevent cannabis leaves from turning yellow, but doing the necessary things to cure them is possible. Cannabis leaves turning yellow is a way of your cannabis plant to tell you what’s wrong with your plant and the ways you grow it. It is giving you a chance to make necessary adjustments. 

As said, there is no perfect formula for growing the cannabis plant. It’s a constant trial and error. But with a few aides from the trusted tips and helpful tools, you will get a good yield in the end. Planting cannabis can be fun so enjoy the process and face the challenges head-on.  

DIY Grow Box for Marijuana

Though the decriminalization and legalization of marijuana have been continuously discussed by many countries and have been seen as substantial, a lot of growers especially those whose main purpose is for personal use are still having a doubt, giving their way to grow marijuana within their perspective privacy and start their DIY grow box. This is why indoor marijuana cultivation has become a trend. 

Linked to marijuana cultivation is a great expense, cannabis cultivators are breaking their own pockets to successfully do everything on their own. From the seed to the electricity bill, water bill, other expenses for equipment and other needed materials such as soil mix, etc, it has been regarded as pretty much expensive. 

With the urge of many marijuana cultivators to have their expenses in growing cannabis plants to become efficient and less expensive, some make their own grow box. As others have difficulty in securing their garden, great quality marijuana plants cannot be procured with growing it in just a plain room without considering other factors like the temperature, lighting, air circulation and so. 

In this article, we will be talking about how to make your own grow box. But before we even go any further, let us have an overview of what a DIY grow box is and what are the factors to put into consideration in successfully making it. 

What is a DIY grow box?

A DIY grow box is customized marijuana grow box that has been built from top to bottom. It is typically easier to make than other home stuff cabinets. Depending on your grow preferences, it can be created by using old wardrobes or refrigerators to attain your perspective privacy. It will act as your cannabis plant’s own home as they grow. 

What are the factors to put into consideration? 

To create a good DIY home for your lovely marijuana plants, there are few factors to put into consideration to make sure that it can effectively help your cannabis grow healthier and successful. 


The first thing you have to consider is the size of the grow box you will be making. Depending on how many plants you wanted to specifically grow inside gives you a better view of how big the grow box is and its entire dimension. 


As the grow box is contained, making sure your marijuana plants would grow healthy requires sufficient lighting. One that is very efficient and cheaper, LED lights are becoming popular as it does provide lower heat for sufficient and successful plant growth. 

If you do not have any access to LED lights at the moment, other light sources are okay such as HID, HPS, and fluorescent lights. However, with their higher heat output, requiring a solid stand or hanging apparatus would help you work your way out to graded quality plants. 

Air circulation

As marijuana plants require air to survive just like their need to light and water, making your own grow tent with enough air circulation is necessary. With that, having a ventilation system is a must. A fan and air filter within your grow box should be installed for better growth and quality harvest. 

Steps to DIY grow box

Before providing you the detailed steps in creating your DIY grow box, the following equipment and materials are required before even starting the process. 

What do you need to prepare?

Shell (This may be an old cabinet box, toolbox, or old computer casing)

LED lights (This includes light cord and light plug)

Old computer fan or small fan that can fit in your grow box size (2 pieces depending on the size)

Carbon filter

Other equipment such as scissors, driller, duct tape, etc. 

What are the steps?

  1. Prepare for the shell. If you are thinking of using an old cabinet box, make sure to remove any partition if necessary. Allow a wide space for your growing plants to experience good spacing. Also, make sure that the shell you will be using is steady and as such, includes a door. If there is none, you can create it on your own by looking for a piece of wood and placing it with hinges. 
  1. Fix your LED lights at the ceiling of your grow box and make sure it is steadily placed to prevent it from falling. Arrange the light cord in the edge of the box and make a hole in the corner where you will be placing out the cord to be connected to the switch. 
  1. Make a hole on your shell base for air circulation. 
  1. Place the old computer fan or a small fan of your selection on both opposite sides of the box. The location should ensure that the air is equally distributed. The same thing goes with the cord of your lighting, arrange the fan cord in the edge of the box and place it out in the hole where it will be connected to the switch. 
  1. Place the carbon filter on the outer bottom where the hole for your air circulation was made. 

As soon as your DIY grow box is finished, you can now place your plants. Your marijuana plants should be placed on pots. Make sure that your plants are not confined in the box. 


There are different options of shell you can use in creating your DIY grow box for marijuana. Depending on your preference, making your own grow box for your cannabis plants is a very easy step. Not only that you can save a lot of money, but you can also learn how to do it in case you wanted to grow as many cannabis plants you want without even spending a lot from buying. 

The only thing you need to do is have some time and effort because, at the end of the day, all your time and effort won’t be put into waste. Hoping the above steps have helped you a lot in making your way to building your DIY grow box. 

How to Grow Purple Weed

Every cannabis plant has different characteristics. They have different sizes, effects strength, and even colors. If you have noticed, some of the marijuana plants have purplish color that hence is capable of turning as a purple weed. One that is very eye-catching and alluring, several cannabis cultivators seem to be enticed and are looking forward to growing their cannabis plants to weed with the same perspective, to make sure that they are purple. 

In this article, we will be talking about how to grow purple weed. But before we even go any further, let us talk about what a purple weed is, how does it even become possible, what are the factors that can make it purple, and other things you need to know about it. 

Everything you need to know about Purple Weed

Purple weed is seemingly attractive and has increased the demand of consumers as they are bright and charming. Every marijuana plant presents innately actual pigments. 

Pigments are naturally produced by plants and are by description the chemical compound generated, producing such color that can be physically described once seen. One of the examples of pigments that every plant produces is the chlorophyll. This substance helps in the plant’s photosynthesis. 

But aside from chlorophyll, anthocyanins are also another example of pigment. The difference between the two is their responsibility. While chlorophyll is responsible for green leaf pigmentation, anthocyanins, on the other hand, is responsible for producing red, blue, pink, and purple leaf colors. 

By knowing this, we can, therefore, conclude that purplish marijuana plants have a significant amount of anthocyanin produced instead of chlorophyll. 

What are the parts of cannabis plants affected?

Purple cannabis plants do not only include purple leaves, but some of them can entirely have a purple color. There are four major parts of marijuana plants that can uniformly have a purplish color. They are the pistils, calyxes, leaves, and the trichomes. 

  • Pistils are the hair-like part of the female marijuana plants that are the main detector of its sex. 
  • Calyxes are the buds themselves. 
  • Leaves are the thin sheet part of the marijuana plants that are normally fan blade-like in shape. They are the main responsible part in photosynthesis. 
  • Trichomes are the microscopic resin glands found on the buds. 

What are the factors that can make it purple?

If you are asking if all cannabis plants can turn to purple, the answer is no. Few factors can make a cannabis plant purple. The factors are: 

  • Genetics
  • Temperature
  • Nutrient effect
  • PH level
  • Overall growing method


Genetics is the major player in having purple cannabis plants. These are the plants that have high anthocyanin content. Hence, they are the only marijuana plants capable of having a purple color. 


There is no way for a cannabis plant to grow purplish without breaking down the chlorophyll. The colder temperature can break down chlorophyll and hence able to let your cannabis plant produce more anthocyanin to turn purple. 

Nutrient effect

Some purple-enabled marijuana plants can verily turn purple without doing anything once they are deprived of nutrients. What nutrients? Typically, they tend to get purple when they lack nitrogen or phosphorus. 

PH level

THE neutral PH level of soil typically produces purple color. It usually varies from genetics or growing means. If the PH level is acidic, the plant considerably turns red while if the PH level is alkaline, the plant considerably turns blue. 

Overall growing method

As discussed earlier, the way your cannabis plant can remarkably affect its color. This includes the proper timing of lowering down the temperature, the number of nutrients being given, and other factors. 

How to grow purple weed?

As you already have a clue on what a purple weed is, how it turns purple, and the factors that can affect its color, this section will help you in detail how you can grow your weed and turn it purplish. 

Step #1: Start with the seed

You can start choosing the right seed strain. As discussed earlier, you should make sure that the strain you will be growing is capable of growing purple. In the first step, there is nothing new. Place the seed in a pot. Wait for it to properly germinate. As long as you correctly germinate the seed, you are good to go on the next step.

Step #2: Wait until the flowering phase

As soon as your cannabis plant matures and starts to flower, that will be the time you can do the real thing. Ensure that your cannabis plants start flowering before even making any other actions. 

Step #3: Temperature control

This step will be critical and is only possible for indoor growing since you have no control over the temperature and growing environment when your cannabis plants are mounted outdoors. As soon as your marijuana plants matured and started flowering, that will be the time you can start managing and shifting the temperature. 

The only way you can achieve a perfect purple colored marijuana plant is by exposing it to a big temperature level difference. Start dropping the temperature level during the day to 27 to 30 degrees Celsius, while during the night, lower down the temperature to 10 to 13 degrees Celsius. 

As this step is very critical, drastically dropping down the temperature was much lower than the recommended one can cause your cannabis plants to die. So be very careful on this step. 

Step #4: Wait for the purple coloration

As soon as you perfectly manage the temperature, it is time for you to wait for the result. Purple coloration can remarkably be notable after 2 weeks. 

Useful tips

As you already know how to grow purple weed, this section will further give you tips on what to and what not to do when you want to start the growing process. 

  • As much as possible, do not deprive your cannabis plants of their daily nutrient intake. Although nitrogen and phosphorus deficiency can turn your marijuana plants to purple, doing this could affect their potency and terpene composition, and hence the effects and flavor. 
  • Grow them indoors. 
  • If your only option is to grow outdoors, choose auto-flowering strains. 
  • Choose the correct type of fertilizer or soil with a neutral PH level. 

Example of strain you can choose


One of the cannabis cultivator’s dreams is to achieve and grow a marijuana plant with purple color. Not only that it gives them a challenge, but it can also be very attractive and alluring. As you have seen a lot of weed that is purplish, growing it on your own is another thing. 

A lot of strains are different. But on your way to growing purple weed, choosing the right strain will be able to help you on your way to being successful. It may seem pretty easy for others to achieve purple weed but this process is very sensitive and it requires great attention as you started doing it. 

So long as you are not depriving the health of your plants and you follow the steps carefully, it is no doubt that your goal of having purple weed will be possible and realistic. 

Space Bucket: A Guide for Indoor Marijuana Growers

The cannabis community is gradually growing over time where multiple growers attempt to develop their cannabis plant. Few already has a background in cultivating, but the majority are newbies with no idea on how to nurture a crop, let alone what container should they store it. That is why Space Bucket exists. As the title suggests, it is an indoor technique that will not cost you anything and won’t stress the life out of you. The Space Bucket method works well for beginners who cannot financially support their plants and does not have a spacious backyard or resides in a congested area. On the other hand, you’ll have to expect restrictions upon cultivation since the plant will only live in a small container.

How do Space Bucket works?

From the sound of it, Space Bucket’s odd quality makes it impossible to serve as a candidate for plants to grow in. But like a typical indoor environment, you will also need to equip it with the proper key elements like lighting, adequate ventilation by applying small-sized fans and a power supply. A standard gallon is the most typical potential Space Bucket, but that should not limit your imaginations to make an improvised and working storage room for your marijuana plants. If you’re a crafty person, expanding your options on what container you should utilize and enhance should be as easy as one two three. 

How to build your Space Bucket?

Here lie the most commonly used materials in developing Space Bucket. Please take note that you can alter some of it into something that can work efficiently.

  1. 5 Gallons of Bucket – The quantity will vary depending on the number of crops you wish to grow and produce. You can always find other alternatives but makes sure that it has a white color or if it does not have the required color, you can still do the painting. The reason why white is the necessary hue is due to its ability to reflect lights which is also one of the critical elements in structuring your area of cultivation.
  1. 23 Watts of Compact Fluorescent Lamp Bulbs (preferably 5 to 6 pieces) and a Reflective Light – Light is the most crucial factors you should consider, more lights, the better. At the same time, the temperature should not be affected by too many light bulbs. As a solution, the mentioned bulb is the combination of two conditions, making it the most recommendable.
  1. Fans – Any small-sized fans can do as long as it is functioning correctly. Most growers use the PC fans instead to make use of their old system unit’s contents. The purpose of having it is to provide an exceptional ventilation process for the plants.
  1. Power Supply and Power Strip – It’s where the power connections will go through, and the latter is to prevent the electricity from overload that could damage the plant.
  1. Timer – Along with electricity control, the lights should also be manageable. With a standard timer, it can take charge of the on and off switch of the lightings. 

Other tools like electrical tape, wires, glue, and other minor equipment are also needed to make every procedure happen. Upon acquiring the necessary materials, you are to head off to the methods. Few of the processes can subject to change in line with your preferences as long as the alternative fits well.

Step 1: Designing your improvised container

1.1 To make drainage water paths available, create multiple holes on the bottom of the bucket.

1.2 To attract lights, paint the insides white, or you can buy buckets that already have the same color.

1.3 Attach the reflective light inside. In this case, an aluminum foil is not advisable.

1.4 To be able to control light leaks, pain the outside part black.

Step 2: Ventilation Process

2.1 Make two holes on the opposite parts of the bucket, enough for the fans to fit in.

2.2 The bigger ventilator will act as an exhaust fan while the smaller will be inside for an intake process.

Step 3: Lightings

           3.1 For a broader light placement, you should attach the bulbs on the lid of the bucket in a horizontal way.

           3.2 Create holes to insert the bulb socket, and the wires should be parallel to the plug.

           3.3 Glue the lids on top of the container for safety purposes.

Step 4: Managing the power

           4.1 Use glue to stick the power strip to any chosen side of the bucket. Make sure the plug from the lights, timer, power supply, and fans can reach it.

To adjust the height of your plant, cut the upper part of each bucket but leave one uncut, and stack them together. Furthermore, make the outside part as black as possible to control the light and for it solely pin its streaks on the plant. 

What should I expect from the Space Bucket?

Having your Space Bucket to place your cannabis plants in is similar to having the said plant indoors except the spaces are restricted, but the good thing is everything’s controllable. Due to the limited room, your yields won’t be as heavy as how you like to turn it out to be. The ideal production rate of a marijuana plant goes from 1 to 3 ounces, and the typical height you’ll get in return from a usual Space Bucket is around 2 to 3 feet tall. In regards to the yield, the expected amount is not guaranteed because the abundance of the plant’s production will rely on the lightings. 

For exceptional outcomes, expert growers tend to over-do their Space Bucket by maximizing every factor as possible. With that, the yields and built are most likely to double in amount. The indoor technique is ideal for cannabis growers who wish to grow a marijuana plant that can only thrive in a specific temperature condition since they can manipulate everything. But, the same nutrients apply as well with a stabled pH level, proper watering schedule, suitable fertilizers, and other supplements.

Common Cannabis Seedling Problems and How to Fix Them

If you have a seedling, you must know that it is vulnerable and the most delicate part of your cultivating journey. With that being said, you must have enough knowledge of how you manage, fix and importantly, you should know what those cannabis seedling problems you might face on the process are. With this, you can ensure that you will have healthy and quality crops, not to mention an abundant yield. 

There are several common cannabis seedling problems that you may encounter, and you better be prepared on what to expect and how you can conquer them. In this article, we will tackle those issues. Remember that these circumstances are preventable, and we aim that we can impart these bits of information so you can be successful in your cultivation. 

Top Cannabis Seedling problems 

AS mentioned, there are many issues you might deal with on trying to produce a healthy and robust cannabis plant. We listed them for you:

  • Overwatering seedlings
  • Underwatering seedlings
  • Nutrient problems
  • High temperatures
  • Improper lighting

1. Overwatering seedlings 

We may pertain to the word overwatering as one of the cannabis seedling problems as the loss of oxygen supplies the pants instead of oversupply of water. Please know that the technique Hydroponic, which uses water as a base, is correctly working as long as enough oxygen is provided. However, is you are a cultivator that uses a normal container, this overwatering may be a real danger to your cannabis plants. One symptom you can notice if your plant is overwatered is if it is sagging but not shivering.

If your seedlings are in a big pot, there is a big chance that you will experience this overwatering issue for your crop. As seedlings do not absorb or consume a lot of water, a big container needs a lot of time to dry out completely. So rather than planting in a vast container, you might want to start using a small pot and wait for it to grow substantially. Then you may transfer it to a huge pot later. 

However, if you don’t have an option for the pots, you will use, or you already start cultivating it using an enormous container, the easiest way to prevent it is to manage or control how you water your plants. You can start in watering them in minimal amounts and sprinkle it all over in a circular pattern. Ensure that the top part of the soil, a measure of a knuckle, is already dried before you start the watering again. You do not have to worry about underwater with your tiny seedlings until its fully grown. These plants will grow faster if they are placed in a smaller container. The trick is to choose a pot that suits your plant’s size and then gradually increase it. 

2. Underwatering Seedlings

Another cannabis seedling problem is being underwatered. It is evident to the plant as she will look wilting and no moisture at all, and you may notice that it is not growing correctly. Even if it rarely happens to cannabis plants or seedlings, this may affect the quality and overall growth of your marijuana plant. This frequently occurs to those novices that are so conscious of overwatering their plants. 

Also, if you mix the issue of being underwatered plant with nutrient-dose, your crop mat turns to have a dark seedling, twisted, and discolored new growth. If your plant while on the transpiration process, and lack of water supply, moisture can be a big help for them to survive. So you might want to plan your growing techniques as well as your surroundings. 

If the plant can’t have enough moisture, this transpiration phase will not go through. That means that your crop’s growth will be messed up and may not grow at all and may result in crop death. 

3. Nutrient problems

The nutrient problems for a crop can be identified easily, especially if you can see yellow leaves that are crispy too. They can also have spotted and any discoloration on its leaves. Please note that marijuana seedlings leave needs to have green and healthy color all the time, for you to say that you are properly giving her nutrients to thrive. Having nutrient issues may arise from oversupplying of nutrients; it can be a lack of nutrients too. 

Per nutrients, overdose or toxicity may give you a burned like a tip or darker leaves. You may also notice a yellow line near the lower leaves, while a lack of nutrients or deficiency may result in pale-looking leaves or discoloration. The most common is nitrogen deficiency, wherein it makes the leaves to have a brownish state and will fold and soft. This kind of issue may only affect the old leaves, not those new growths, so do not confuse it with the yellow leaves on the top. 

With these, you should always remember that your seedlings do not need ample nutrients, so do not overwhelm them. And if you have a well and nice pot mix, they should be okay for their first week. Another thing is that you must know what type of nutrients are you giving to your seedlings. 

4. High temperatures

Your seedlings or plant may start to curl and fold if we don’t want that to happen if they receive a high temperature. They will begin to wilt and die eventually if this happens, so let’s know what we need to do. 

Always monitor the lightning in your grow area; you should also consider the climate you are in if you need to adjust and place tools and types of equipment that may help you balanced the lightning or temperature in your growing tent. 

These seedling are comfortable with 68 to 77 degrees F. A thermometer is a must if you are cultivating, and it is your buddy when maintaining the right heat and humidity for your crops. Please prevent placing your lights near your plants to prevent burning. 

5. Improper Lightning 

Did you notice crinkled leaves or burnt leaves? As well as falling or leaning tall seedlings and those ample amounts of stem internodal spaces? These symptoms are because of having improper grow lights in your indoor cultivation. Thos leaning stems are the result of the dense leaves that burned and folded. Inadequate lighting may impose a threat to your precious marijuana crops, so you should know how to fix it. 

If you develop your plants outside, attempt to cover plants up on particularly summer weather, and ensure that every piece of your seedlings is accessible to sunlight. When they display symptoms of lighting issues, you can resolve the dilemmas by adjusting it early on, and it is enough to make them back on their feet. 

Common symptoms of having cannabis Seedling Problems

For leaves: 

  • Leaf Discoloration
  • Yellow leaves
  • Crispy 
  • Spotted colors
  • Burnt tips and edges
  • The pale color of the leaf
  • Death 
  • Slow growth

For plants: 

  • Leaves Wilting
  • Drooping
  • Algae growth on the leaf
  • Improper growth phase
  • Slow in growth
  • Dark green color


Generally speaking, your seedlings will want a humid environment, high humidity, and also some light. Your seedlings will not want much more than the nutrients they need. They will become perfectly happy and satisfied as you have the right guide and fix them to avoid these cannabis seedling problems. 

Finally, seedlings or plants with significant genes have less sickness transition and become less prone to infection, malnutrition, insect, and environmental factor. That being said, you should also get the right strain that will suit your needs. 

Cannabis Light Burn Symptoms and Solutions

Our cannabis plant could only take much of light exposure. And there is a huge possibility that they will be damaged and wilt if sun exposure or improper lighting occurs. In this article, we would like to discuss what cannabis light burn symptoms and solutions may help you in getting quality and potent strains.  

There will be situations that they will show symptoms or evidence that a strain receives enough light and signs that they are being exposed to too much. There’s so much light that can harm the weed plant in different ways. Light burning means that your marijuana leaves nearest to the source of light becomes yellow and crumble in certain instances, and eventually die off. In some cases, it could also bleach the vine, lose color, and into a light white.

Cannabis Light Burn Symptoms and Solutions

Even though marijuana requires a considerable amount of light, this can be given far too much. Whenever this occurs, and your marijuana plants undergo stress, there can be all kinds of massive issues. We will provide information on how we can recognize and combat these maladies. 

How about they’re signs and symptoms of being light burned? Once your crops struggle from bright burning, they will typically be affected by those leaf on its tip that is directly beneath the lights. These are going to turn yellow. Though – and light burning doesn’t always manifest immediately in leaf buds. Also, often, before they transform in different hues, this same leaves might start pointing up first.

How to tell cannabis light burn symptoms due to lack of nitrogen? Any issues with growing marijuana, including a nitrogen shortage, can even have yellow buds, but there were forms of identifying one disease from another. The most important distinction in a nitrogen deficiency would be that light burning impacts the top leaf close to the light, whereas this nitrogen deficiency would then usually begin to showdown to the bottom of the crop of those old leaves.

Its yellow leaves are either a nitrogen deficiency and can also wane and collapse, usually falling off alone. Besides, the light burnt leaves will generally stay mostly on plants, that will not be easy to pick up. That yellowing mostly from a light burn would even hold the central veins of the green leaves, that is indeed the case for a deficit in nitrogen. But those yellow leaves weren’t the only sign of light burning at the edges. Often, its leaves, along with brown coloring and burned tips or tops, may transform a reddish or like purple as well.

If your marijuana plant will not get the right nutrients for optimum growth, or whether it continues to suffer from several other problems, it’ll also increase the likelihood that your crop will be decimated by light burning, which can be handled much better by safe plants.

How can you recognize a light burnt leaves?

Cannabis Light burn diseases don’t generally have to reveal up immediately. Sometimes the light could be just a little too near to the plant; that also means that its burning is slow, and you will not immediately recognize it. In this scenario, after many weeks, the foliage will gradually die off. If that occurs, then you will see the initial indications of light burning on older leaves and will make it difficult to locate the true source.

What is Light Bleaching in leaves?

The leaves of cannabis which are revealed too much from the light can often be bleached. However, instead of turning to yellow and starting to crumble, they will lose their color and transform into white. It can sometimes occur when using modern, LED, or an HPS light installed near to the plants. 

White or light-bleached leaves or buds were often claimed to be albino marijuana or white marijuana strain of yet another novelty. Sadly, such bleached crops, besides their fascinating appearance, are nothing wonderful. Yes, bleached buds are likely to have lost much of their taste or strength, or both, now.

These bleached leaves are not exceedingly common because of too much exposure to light. These conditions could make it totally burned, and then her small leaves will have a darker shade of brown. 

How can you prevent cannabis light burnt?

Once you observed or think your crop suffering with light burning, you should do the tips below:   

  • Make enough distance of your crops or seedlings from your florescent bulbs or lights.
  • Decrease the intensity of the lights

If you can’t make some adjustments with your grow light because it is higher and farther away, you might look at leaning it down so you can maximize the gap. It is also recommended to remove the tip of your crop, only while your cannabis is already in the veg process. Talking about the distance you can do to prevent burnt leaves, the next question is, how far can you adjust your marijuana plants? We will also present the optimal measurement of your plants from your installed grow lights. 

Growing lights could perhaps differ tremendously in their frequency and voltage, throughout the beam of wavelengths they give off, and that in the particular type of light in use, that is. LED / HPS. Many other reliable growing light makers will have relevant data about the suggested distances from the way to keep crops. This range would also rely on the state the crops are developing in. Generally, new growth requires a greater length as they’re more sensitive to temperature susceptibility.

Cannabis light burn outdoors

There is much less chance of light burning outdoors, under the most strenuous bright sunlight. The only other moment you have to be vigilant of so much sunshine is when you push plants from within onto the outdoors. Throughout this case, your erstwhile indoor plants also had to get used to the exterior. You should not push them straight into some kind of sun-drenched location with your enclosed shelter, but first position her in shaded, open place until they can gradually become used to a bright new world. You should then growing the crop in a warm and sunny location after about a week.

Cannabis light burn due to heat stress 

In addition to signs of heat discomfort, marijuana light burn occurs very frequently. The possible explanation seems to be that numerous types of growing lights would also consider giving off a significant amount of light except for some lights ( LED ).

Besides plants that are too near to a source of light would also face additional heat stress. It implies your crops will probably exhibit a mixture of symptoms on both circumstances-too much light and far too much high temperatures. Likewise, these signs can take the form with plants wilting, discolored, and dying.

Varieties of indoor marijuana that grow in electric lighting may use a basic trick to see if the temperature under a rising light would be too intense for the plants: merely put your hands under the light around the level of your crops. Then is it still comfortably, warm, and not even that hot, then your crops must be okay too.


Understand that any adjustments to your crop’s growth conditions, such as reducing or raising the light output or heat, would entail specific needs for watering and nutrients. Too much light would then make your crops grow because they will need more nutrients and water as well. Daily irrigation with concentrated light and elevated temperatures will also help to limit cannabis light burn under these growing conditions.

Cannabis Temperature 101: Maintaining a Perfect Condition for your Plants

Plants like cannabis need to have a certain level of temperature to function properly. Temperature plays a huge role in a plant’s life in which dictates the rate of photosynthesis. While it is an important aspect of a plant’s life, it cannot produce its heat, unlike animals and humans. This is why growers should know and understand the importance of cannabis temperature during cultivation and how it can affect the overall quality of your plants.

Importance of Cannabis Temperature As A Grower

During the process of photosynthesis, the plants will need to reach a certain level of temperature so the distribution of sugar would continue to flow. Low temperatures will often have these sugars stuck within a certain area of the plant and your crops will begin to suffer. Cannabis temperature is an important factor as it allows the plant to function properly. The low temperature will stunt the overall growth of the plant and you end up having low-quality results in the end.

Another reason why maintaining the right temperature is key to the success of your cop is to avoid issues such as spider mites, mildew formation, wilting, and nutrient burn. These incidents are more prevalent if the area is also humid.

How Cannabis Temperature Affects Overall Growth

Speaking of cannabis temperature, growing them at a certain temperature level can have a different effect on the plant’s overall growth. Temperatures below 15C or 60F tend to slow down the growth of the plant. The cold temperature would immediately kill the plant. However, certain cannabis strains thrive well in colder temperature but they often provide less yield than the ones that are grown at suitable temperatures.

Colder temperature also induces mold formation especially when the area is damp. When frost starts to melt in colder areas, unnecessary water begins to form around the plant. This is the perfect condition where molds begin to grow. One visible sign that your cannabis plant is reacting negatively to the cold temperature is when it starts to droop down.

Another reason why cold temperatures can harm your plant is that it can lead to over-purpling of the leaves. The shades of purple in your cannabis leaves do bring a certain level of aesthetics to the plant. However, beauty can only last long since too much purpling can lead to reduced photosynthesis. This can lead to stunted growth.

A plant that is left in colder areas will have lesser chances of growing to its full size than those that are grown under controlled cannabis temperature. Cannabis plants that are grown indoors are far more vulnerable to cold than those that are grown outside.

High temperatures also affect cannabis plants. When the temperature is too hot, it causes the plant to grow even more slowly than before. Temperatures beyond 80F or 26C will begin to slow down the growth of the plant and will cause the buds to loosen up. High temperatures can also reduce the potency and aroma of the buds as well as issues like root rot, wilting, and oxygen deprivation.

While other cannabis strains thrive in higher temperatures, it is best to monitor the development of the buds. Regular checkups of the quality of the buds will help determine whether your entire crop has been affected by such a change in temperature.

Temperature and Humidity

Temperature and humidity all play a major role in the development of cannabis plants. These factors are closely related to each other and can even resolve issues by fixing one with the other. Humidity refers to how much water or moisture is in the air. The relative humidity is measured by the moisture in the air at a certain temperature.

The relative humidity is vital to understanding growth and its connection to the temperature of the air surrounding your plants. This is highly noticeable especially when the area becomes dry or humid. When the air is hot and dry, the plants will tend to stretch out so it can release heat and reach out to a cooler area. If the air is too cold and humid, the plants will grow slowly and are more prone to molds and other issues.

Cannabis Temperature at Different Stages

Cannabis tends to respond differently to temperatures depending on the different stages of their life. Growers will need to ensure that the plants get the best temperature within their specific growing stage to promote proper development and high-quality results. These are some of the ideal temperatures for every stage of a plant’s life:

1. Vegetative Stage

Seedlings tend to grow fast at this stage. This is why a slightly warmer temperature ranging from 70 to 80F or 20 to 30C with very low humidity is applicable at this stage. Giving the plants a cooler temperature during the dark period should help the proper development of branches and leaves at this stage.

2. Flowering Stage

This is the most crucial part of a cannabis’ life. Growers should be hitting the 80F or 26C mark throughout the flowering stage of the plant. Keeping the temperature lower will help the plant develop high-quality buds that produce the best terpenes and cannabinoids. Exposing the plants at a slightly colder temperature at night near the end of the flowering stage will also provide an even better result. Do note that a cooler temperature does not equate to exposing your plants to cold temperatures at night.

Higher temperatures at this stage of the plant’s lifespan could mean disaster for growers. The issue here is that high temperatures will slowly evaporate the natural substances found in the buds at this stage thus lowering the quality of your overall yield.

How Grow Lights Affect Cannabis Temperature

Grow lights are an important tool for proper cultivation especially within an indoor setup. However, this will also affect the overall temperature of the grow room and can even pose a concern for the plants as they tend to emit high amounts of heat when they are turned on. This is the reason why choosing the right grow light is key to the overall success of your production.

CFL grow lights are very common and are often purchased in your local general merchandise store. They emit low heat and are great for smaller grow rooms. If you plan on having bigger yields or a bigger grow room, you can purchase more CFL grow lights but it will begin to increase the temperature within the room.

HID grow lights are composed of High-Pressure Sodium, Metal Halide, and many other types. These grow lights tend to use a lot of electricity thus generate a lot of heat as well. While HID grows lights are more likely to consume the same amount of heat that is equal to the number of CFL grow lights. However, with HID, you get more coverage and most HID grow lights have a built-in cooling system.

In the end, getting the right grow light depends on the area of your grow room. Those who have a smaller grow room should be looking to get CFL grow lights while those with larger areas should get HID grow lights. This way, you limit the amount of heat produced by these grow lights which could ultimately dictate the growth of your cannabis plants.

Things To Do To Control Cannabis Temperature

Managing the temperature within a certain area is a tough balancing act. It is a very tricky process that requires certain finesse and understanding of what is happening within the grow room. Those who struggle with controlling the temperature will need to do the following:

1. If the area begins to feel hot, make sure that you have a good exhaust fan to pull the hot air from the area and into the area outside. This should normally fix any issues regarding warmer temperatures within your grow room.

2. Improve air circulation by installing fans in key areas of the grow room. Poor air circulation would lead to hot spots that damage the plants in that area. Fans should be pointed away from the plant and avoid facing it directly to the plants especially to the stems where the plants could start swaying. This may lead to breakage. It is much better to point the fan directly to a wall and allow the air to bounce from the wall and into the plants.

3. Grow heat-resistant strains. Choose cannabis strains that are known to withstand sudden changes in temperature to ensure that they can still grow and mature properly even with the unstable conditions within your grow room or your outdoor farm.

4. Switch your lighting schedules to turning the grow lights at night and turn them off during the day. This way, you provide a warmer temperature at night when it is normally colder and provide less heat during the day when it is the warmest.


Finding the right cannabis temperature is imperative as a grower if you want to produce high-quality buds in the long run. Remember that certain strains can withstand a perfect condition while others can thrive in cooler settings. Knowing how to control the temperature within a certain setup is key to the proper growth of your cannabis plants.

Best Way to Store Weed

To get the most from your budget for marijuana by stockpiling your weed to preserve its power, flavor, and much more. Today we glance at stockpiling pot to help keep existing stash healthy. When this comes to packing your marijuana, the technique you prefer makes an enormous difference with how lengthy your buds retain quality and effectiveness. In this article, we are going to discuss some of the best ways to store weed.

As others have already mentioned, unless they’ve been successfully treated and maintained safely, marijuana can stay constant for up to 2 years. Sure, proper cannabis storing requires much more than tossing a tightly rolled plastic container into your undergarments drawer; you ought to achieve the ultimate environment for something like the best long-term cannabinoid storage.

What’s the best way to store weed?

Mildew, as well as other moldings on marijuana and some other organic material, grow at conditions between 77 ° to 86 ° F, so simple measures could go away to maintaining your weed in a dry, dark spot. High temperatures will dry off cannabinoids and terpenes, which have grown for months. If these natural oils become too dry together with the organic material, a warm, harsh smell can arise.

Cooler temperatures also delay the process of cannabis decarboxylation, this same process by which THCA transforms into the alluring cannabinoid THC. THC gradually deteriorates into CBN, a cannabinoid of different symptoms and properties. Warm air contains more humidity than cooler air, which takes us to another factor.

Do’s and Don’ts when storing your weed


  • Keep it warm and dry storage to make sure that the cannabis will not become moist.
  • Make sure to store it using containers that were not used for any other chemicals.
  • Use types of equipment to check and take care of the weed’s RH grades.
  • Make sure to vacuum seal the container where the weed is placed.


  • Do not store your marijuana in super cool places and almost at freezing level.
  • Do not just save the weeds in ordinary plastic bags or containers.
  • Avoid placing the weed container beside or on top of the appliance that gives out heat.
  • Avoid storing your marijuana with a pipe or any other equipment that is used for smoking.

There are other factors involved to make sure that you are doing the best way to store weed. Of course, additional food and edibles that have marijuana content or have cannabis ingredients do use a different approach to saving them. Make sure to follow the guidelines for this kind of example, like storing refrigerated or checking the expiration date to ensure that the quality and the cannabis content will not perish over time. 

On the other hand, liquors and other drinkable products that were infused with marijuana also degenerates with heat and other factors that affect the storage of cannabis. This does follow special instructions depending on what time of liquor has cannabis content and the amount of weed that the product contains. Usually, edible cannabis-infused products can be stored for several months, but it can be further than that when it comes to marijuana-infused drinks.

Things to consider when storing marijuana

Like what is stated before, considering the perfect place and situation for storing your marijuana is one crucial thing, but consider the elements that can still affect them while in storage is another. To ensure that your weed will be in top quality for a long time, it is wise also to know what can kill your product while in place for storage.

Proper curing is the first thing that we need to know and do for long-term cannabis storage. Here are the other common elements that a person needs to look out because it can degrade or, worse, kill the buzz out of your marijuana products.


Several factors could lead to marijuana flower deterioration but the light seems to be the greatest factor that will destroy your cannabis. Likewise, intense UV rays will render your car’s color scheme appear dark or add streaks to the summer makeup, and it can also eat away the most important compounds in your hemp plant, terpenes, and the. To avoid premature degradation of these essential chemicals, secure the weed far from a clear trigger of light in transparent containers.


Oxygen content is yet another major factor throughout the long-term storage of cannabinoids. Excessive oxygen can accelerate the process of decay and too little can change levels of humidity that can induce mold or fungus. Although vacuum sealing is an effective way to defend your marijuana from long-term oxygen toxicity, it isn’t always an ideal solution for all of us who wouldn’t keep finishes scattered on the floor.


Mold prefers moisture so you must keep having a great bud safe to avoid it. But good value bud soon won’t get too warm without causing degradation of terpenes as well as cannabinoids. Thus the significance of ensuring appropriate amounts of humidity for both the long-term cultivation of cannabis, preferably around 59 as 63 RH air temperature or the volume of density in the soil compared to what it will bear. The easiest and affordable way this is by using moisture control measures, such as Evergreen Pods.

Whenever it comes to protecting our secret stash, almost all of us depend on the tested-but-untrue method of throwing everything in a pouch and stashing it away into a sofa. If you’d like to weaken your lovely buds into one that appears like a schwag. As it plays out, anything will affect the consistency of your weed, from air to sunlight.


To summarise, cannabis must be properly stored. Its flowers including buds may remain effective for years if preserved properly, while plants and leaves could maintain their viability for months. Whether you’re a rare smoker but want to hold on to these delicious weeds you’ve managed to pick up from either the pharmacy, proper pot preservation should ensure that your supply can last for several months. Now that you know the best way to store weed as well as how to better preserve your pot, you will have years of celebrating any major crop.

Marijuana Grow Room Humidity Guide

A big issue for cannabis farmers is humidity. So why is humidity essential for the marijuana plant, what are the optimum levels of a certain grow room humidity needed to sustain in your growing area?

When you desire to grow sticky, high-potential buds, your marijuana will take effort into many of its needs. Remember that– which is commonly neglected – for the developing a cannabis plant is humidity.

Whether you like it or not, this humidity is crucial for your cannabis. Humidity could help you understand your plant’s potency and resilience to battle with mildews and common molds as well as the amount of water they need to absorb. Getting the right balance can assist them to flourish and improve their growth, not to mention for you to be able to get bountiful yields. 

Fortunately, having the right to grow room humidity is a fun learning experience and not too much to learn. You can be a master of it with a little bit of effort and love for your crops. In this article, we will provide information that you can use to have enough knowledge about humidity and how you can give your cannabis a boost with their production. 

Understanding why grow room humidity matters

In all phases of growing cannabis cultivation, your crops needed constant consumption of water and the amount they will need to vacillate with the level of humidity in your growing area. Once the humid is high, your marijuana plants use leaves to receive moisture from the air that causes a less need for water from directly from its roots. Contrarily, they would also pull in an even more considerable amount of water whenever the grow room humid is low.

Because humidity shifts on how much water the plants drink, as well as the amount of water that you offer them, has nutrients in it, to be in supervision of humidity can provide you better control over their nutritional intake.

However, controlling the grow room humidity is not only about preventing issues, but having a balance and right grow room humid make your cannabis plants stronger, have leafy plants, and be healthy and quality buds on your harvest. 

What are the effects of not having the right humidity?

This is not to intimidate you, and we believed that you must know what’s wrong with bad humidity control in a grow space. We understand how great humidity is since we have experienced every one of these first-hand issues.

Powdery Mildew ( White ) 

It is a fungal condition that exhibits high humidity areas. It can be difficult since the new growth of cannabis grows in damp conditions. Fortunately, by ensuring that there has been a proper flow of air in your growing area, you help reduce WPM; a simple oscillatory fan – at such level surface – definitely works.

Rotting of Buds

Amongst the worst conditions that a cultivator can suffer as a consequence of inadequate humidity regulation. Foresee extracting a huge, thick key cola of your crop just to find the interior is white or gray with mold.

Nutrient Problems

Humidity in a growing area is a parameter that mainly influences how often your plants are going to drink. If your room’s air is dry, your crops will become more likely to consume from their roots. When they’re not consuming enough because of higher temperatures, low moisture may allow them to consume lots of water from their root and suck up very many nutrient rates.

Slow growth

Marijuana plants fond of higher moisture when young and lesser moisture if mature. If they do not have these factors, they do not develop as quickly or as they should.

Basics of Humidity

When cultivating weed, you know that you need to control humidity, but you’ll never realize the perfect humidity you ‘re looking for. We are here to guide you, please see below:

  • Clones – 70 %
  • Vegetative – 40-60 %
  • Flowering – 40- 50 %
  • Final Weeks – 40-45 % 

Humidity is, in essence, a calculation of just how much of the water vapor is ‘kept’ in air. There are various methods in which humidity can be calculated, like complete, specific, and relative humidity.

Most farmers talk about this Relative Humidity, also known as RH, in the growing area when they communicate regarding humidity. This relative humidity tests how much water is in the environment compared to the average volume of water at that altitude, which can be kept in the environment. This is a fast guide for the various phases of a life cycle of marijuana for relative humidity that you are looking for. We’ll go over all of these in more depth


Optimum humidity is 70 percent RH for clones. It requires time to build a water-intaking root network. New clones rely entirely on having moisture from the atmosphere via their leaf, and that is only achievable with high temperatures. Requiring proper humidity levels would significantly improve the likelihood of effective rooting of these clones, and improve the growth of young clones.

However, the roots were not the only way to water your crop. Leaves will potentially draw water vapor straight out of the soil, so higher humidity in the soil enables the leaves to bring more water into the plant if appropriate. Low humidity rates in the air may cause development to be slower before your plant has completely formed roots.

Flowering plants 

Optimum flowering plant humidity is 40-50 percent RH. Preferably, in the early part of a flowering stage, growing room humidity must be reduced to about 40-50 percent. As crops approach production, some farmers lower the grow room humidity at below 40%, maybe even less so that they can force the buds to produce that much resin, although I have seen that certain plants can be highly stressed, so the technique must be used cautiously. Lower inflation rates the humidity only a little at a time and sees how plants respond before bringing the plants into intense surroundings.


This is particularly dangerous throughout the flowering period since without you realizing it can develop on or within your buds. When you discover that mold is continuing to grow in your buds, or have buds that are rotting from inside, you must discard all infected buds quickly. Bud rot will kill whole harvests, so check your growing room as it may infect others, and all become sick. When you can not reduce the humidity as well as having a raging mold epidemic, cutting your losses and harvesting instantly may be the best solution to prevent any more buds from being rotted.

Even though humidity is lesser, it is still essential to have air flowing around and through your crops. Tiny fans blasting over even under the canopy of the crop will help keep air moving because no wet places form through any crop portion.

Drying buds Humidity Cure

In the drying space, the optimum humidity is 55 percent RH. Maintaining the humidity or around the range of 50 percent will enable the buds to dry and keep the latter from drying fast. Also, this range is ideal for mold prevention, and if you are a beginner, it’s not any good for drying!

Few farmers prefer to maintain the humidity somewhat higher as an innovative drying and healing strategy such that buds dry slowly, which may potentially improve the consistency of your healed buds. High humidity extraction is known to be an innovative technique since the drying should be performed with special caution to avoid mold formation on your dried buds!

Air ventilation in the drying region is fine, so it is advised that no air is sprayed straight and over plants to keep them for drying very fast.

What if it gets too cold?

Cooler times tend to slow the growth. Temps below 60 ° F (15 ° C) may upset crop production, and cold weather will surprise a plant material, or perhaps even kill it.


Many enclosed marijuana growers try to associate with far too much high temperatures, and high humidity levels-this is because growing lights can become very hot, and cannabis growth is often restricted to quite narrow areas due to stealth or privacy concerns.

Grow Room humidity depends on where you work, and whether you have decided to design your growing area. Most farmers are trying to reduce their humidity, as the number of leaves and foliage in a limited growing region continues to allow moisture to increase.

How to Flush Cannabis?

“Flushing” would be a word you may not be comfortable with once you begin out on a marijuana producer. Although frenzied thoughts of attempting to push a plant material down a drain can leap to view, flushing is basically if you avoid supplying nutrients to your plants and instead of giving them liquid. Generally speaking, the method looks as simple at it; after all, knowing exactly once to flush or how many seems to be a more sophisticated skill.

Flushing is a convenient and simple technique that can enhance your marijuana buds’ consistency and sweetness before growing season. Sounds sweet, doesn’t it? Naturally, it is! But farmers do need to be vigilant before harvesting with flushing. If you’re doing it very soon you will potentially damage your efficiency and decrease your outputs. In this article, we will provide information on how to flush cannabis and the proper execution with all the things that you need to know about this method.

The Basics On How to Flush Cannabis 

How would you like to remove all the nutrients off the ground? It doesn’t affect your crops? It helps a major manner of harvesting yourself. This allows the marijuana production to use whatever residual nutrients left available in the ground after the minerals are stripped from the surface. This is like our human bodies quite a lot. We ‘re taking plenty of meals and turning what we never use into fat. In acute conditions when food is limited, the body depends on nutrition on the accumulated fat.

The minerals should be diluted with water enough for roots can obtain nutrition. The roots do not have nutrients that are preceded, whether in a mixture or attached in a chemical system, even though they are abundant. Flushing through water will flush off the contaminants already within the formula.

Tools to use for Flushing Cannabis

The TDS and EC with pH meters are important tools needed to modify water liquid fertilizer appropriately. If the pH is outside the recommended range ( i.e., too low or too high) vitamins and minerals fall out from the formula and oxidize. That indicates heavy particles are forming solids and falling out of the product. Plants consume their vitamins instead of ingesting them, so they do not have nutrients that are instigated. With these tools, you can now start going further on how to flush cannabis.

Flushing Cannabis methods:

  • Active
  • Passive

The difference between Active and Passive Flushing

The distinction between active and passive flushing because at some level in the urge to the maturation of the crop, whether another person or nature decides to assist the plant mature by eliminating nutrition from the land. The main nutrient which is separated in this procedure is N so it removes several other water-soluble enzymes. Plants that grow in mixed soil are flooded with water. extracted salts will be drained away. Depending on how extensive the flush is removed, it removes more than, most or almost the whole of the essential nutrients. They were mostly replaced by a new fruiting formula which may include certain macro but rather micro pesticides and also estrogen, enzymes, or sucrose.

Crops react swiftly to these abrupt changes in the external environment whilst also concentrating their power on flowers maturing rather than continuing flower development.

Steps for Proper Flushing of Cannabis

  1. Overflow the soil of the same amount of fresh liquid it can retain.
  2. Allow it to be recovered for several minutes by flooding the soil to wipe everything aside from its plant.
  3. Let this process continue until the water color turns to brown and dirty.
  4. Once the watercolor changes, use a TDS meter (Total Dissolved Solids). The best measurement using this tool is around 1300 ppm.
  5. Keep the flushing process until the number on the TDS meter drop down to the level around 50 ppm or until it matches the water you are using to flush.
  6. By now, you will notice that water is starting to turn into a more refined and clean color and texture. This is what we are looking for since we want to remove as many solids as possible from the plant while we can.

Marijuana flushing is an easy process. It is easy. Any time you normally eat, instead, you wash. All you need to be used for flushing is raw plain water, just ensure that the pH for weed is healthy. Water very likely maintains a balanced pH, so if you still need to change the pH of your flushing liquid with the appropriate treatment, please be sure in doing so. Also, one thing you have to think about is pH changes.

When cannabis plants should not be flushed?

The only period that flushing isn’t allowed would be when developing in a modified soil profile. That is why all the minerals the crops need to survive are already in that soil. By overrunning the vegetation, you can wipe away as well as harm the diverse system you have tried incredibly hard throughout the land to also develop. Besides, these crops receive nearly always clean water all through washings. In this landscape, plant uptake of nutrients is normal, vibrant, and easy be for the flower to generate.

Even so, the absence of flushing really shouldn’t be a problem since there are no synthesized or additional nutrients introduced to this interface. Instead, your crops depend on microorganisms that split down and carry organic content to either the roots.

What is the outcome of Flushing?

Taking the additional time even after weed is picked to heal the bud towards its full potential. On the hardpoint, a good treatment will slash, even more, eliminating things such as unnecessary chlorophyll. You’ll be astonished at the distinction this little effort can make with your goods. During the first inhalation of such a perfectly soft haze which reaches the rear of your mouth as gentle as sugar, all of one‟s hard work would show. This is polished essence at its best. You can improve your marijuana output by adding extra water!


When it applies to flush cannabis, there are no conclusive responses. No one here has completed the form of intense scientific trials it would end up taking to be free to pronounce the accurate perfect place and moment to flush with legitimacy, what the actual composition will be, or whether it’s that much good enough to justify it first. From other observations, flushing tends to allow for the nicest buds against disadvantages for at minimum very few days, two to four weeks until harvesting.

How to Make Dabs of Cannabis

The new cannabis trend is a method for producing highly condensed marijuana products, also recognized as “dabs,” via simply just use a traditional blow dryer to apply controlled pressure and temperature to either a cannabis plant. This DIY process on how to make dabs of cannabis has mostly started to take off by many hashish enthusiasts a few years ago, but still, there is by now a market demand for what amateurs call Rosin Tech — such as manufacturing-sized production set-ups — and a genuine awareness among intelligent weedheads that such chemical-free, explosive decompression-free, the fast-and-easy concentrate will eventually conquer the marketplace.

Whether you’re trying to become a master of the dab, you need to perfect how to start making dabs! Marijuana dabs were the fury nowadays, owing to the mad scramble of impacts due to the higher concentrated cannabinoid potency. A few other THC wax specimens tested up to or higher than 90 percent THC. This article will give all the information you need to start perfecting the craft of Dabs.

What is “Dabs”?

Dabs are resinous marijuana concentrate produced by harvesting THC, CBD as well as other active cannabinoids, often using combustion byproducts or greenhouse gases solvents, to create solids commonly known as wax, break, budder, butane dried herb (BHO), or fresh resin. Assume with dabs as “bite-size,” single-serve hits which are generally no larger unlike your finger fingernail (although that’s a huge amount!). Using only a dabbing device, you squeeze a dab it onto finger but instead apply a torch to switch the solute into vapor. Eventually, breathing as many of the mist as you can. In a moment, this is dabbing.

8 Types of Dabs

1. Shatter

Alluding to an amount of glass-like blends, it is simple to see where it got its title shattered. Because all shattering styles are bendable, most are rough to the contact, and others may be soft. Shatter is quite popular because of its credibility for being pure and of quality.

2. Crumble

Crumble matches its identity with the roughest consistency of all the types solely on this whole shortlist. This centralized processing handling using a little faster as compared to many other dabs.

3. Budder

Since it possesses a comparable quality to peanut butter, This type of Dab is surprisingly easy to use, as well as a throwaway gag, too. It is made into either a seamless material by flinging resin or insulation shatter.

4. Wax

Wax dabs were not necessarily sticky, and can only be managed with a dry dab device. If you ever don’t follow this heads up but also try using your fingers only with wax, you’ll end up with such a greasy mess. While shatter is usually known to become the truest dab available, high amounts of THC nor CBD may be present in the sapper wax.

5. Oil

Some focuses are known as liquids with several different concentrations of extract, as compared to a stable state. Usually, such oils were used in a vial for easy and functional uses, although they usually taste distinct regardless of the manner the oil was collected.

6. Resin

In fact, the resin was its oily trichomes present mostly on leaves to flowers of adult pot plants. Resin too is classified as ‘sap’ by washing the stems out and treating them. It is a naturally occurring substance and using it as a protection against predators that could consume the crop before anything reproduces.

7. Live Resin

Live resin was not something users can generate in the house, demanding a research lab as well as trained technicians. A comparatively recent form of the compound, it requires a lengthy and complex method of cooling freshly grown marijuana plants cryogenically. Many that want the real medical effects of marijuana to choose live resin. But it’s usually more expensive than everyone else on the whole list, kudos to the scientific manufacturing process.

8. Rosin

Rosin is a simple and secure-to-produce concentrate that is created by draining and treating cannabis plants when using the amount of heat to discharge resin-filled of THC. You could manufacture rosin in the kitchen versus live resin because it doesn’t demand chemicals and is inexpensive to manufacture.

Equipment to Use on How to Make Dabs of Cannabis

Dabbing needs some sophisticated instruments, so users can’t attempt one morning to consider starting it out without running errands first. Odds are you also have some of the raw components lying across your living room. You’ll also need below to produce dabs:

  1. Dab rig – A customized bong that is utilized on dabs.
  2. Nail – This is not the kind of nail that you are buying at the home improvement store.
  3. Dome – Aligns each nail and allows it to generate the wax that is vaporized.
  4. Carb cap – Generates a small oven at reduced pressure that enables evaporate the wax.
  5. Your Dabs – The star of the show.

Steps on How to Make Dabs

Here is the step-by-step tutorial below on how to make dabs of cannabis in the comfort of your home not including any risk of property damage or even death:


  • 2.5 to 3 grams of cannabis
  • 100% Alcohol
  • Metal screen
  • A container that is easy-to-pour and is heated and freezes friendly.
  • A pan
  • Clean coffee filters
  • Hot water


  1. Just tear your ganja up a little bit.
  2. Place it in a heat-safe tray, and thaw the marijuana for 20 minutes at 93 degrees celsius. Please be aware that the above is not about decarboxylation. 
  3. Place it and all the containers of alcohol throughout the refrigerator for four or five hours, until the weed is dry enough.
  4. Wait for it.
  5. Place ample chilled alcohol throughout the weed to coat it by half-inch or more.
  6. Mix it softly for about 15 to 20 minutes.
  7. Using the metal screen, you can pour it all through so that the weed and the alcohol will be separated.
  8. Put the bud in-room temperature place for now.
  9. Get the filters and put the alcohol through using one of your containers.
  10. Make sure to gather all alcohol that you could from the filter by pressing it a bit.
  11. Let the alcohol boil away. Position a coffee filter above the container but mostly simply give it some time. 
  12. Squeeze the wax off the container when that alcohol is released, and place it in a plastic container or with some paper towels.

And, you’re done. You can now enjoy your dabs!

Dabbing: Pros and Cons

As for those other cannabis consumption forms, caution must be taken at dabbing. These are only a couple of both the benefits and drawbacks relevant to dabs:


  • Casual marijuana users report a stiffer, longer-lasting high.
  • You don’t need large numbers. A little dab of extract, as opposed to other approaches, will theoretically relieve aches and pains for a longer time.
  • The intensity of the blends has created others to as an efficient painkiller quite popular among medical patients.


  • The extraction of the solvents is very harmful. if users not a seasoned chemist, buying ready-made mixes or using the rosin technique is usually the best way to do so.
  • The peaks as from dabs could be quite intense due to its intensity. So, it’s smart to position yourself and just use minimal quantities at a moment.
  • The lungs and throat can be affected by the solvents used in a very harmful way.


Like with any unique marijuana effort, starting small is always a smart option, and taking it slowly. Recommend one-hit whether you’re dabbing for maybe the first point, and allow time several minutes to see just how the body’s reaction. When you like one, you can still hit the gear again because if you carry one too far, you won’t recover those impacts. The same goes for how to make dabs of cannabis, Work with a simple batch, have that process hanging but then raise your output when you have some experience. If anything, then in a botched effort to try new things, you will not bother wasting either of your valuable buds.

At the end of the day, it still depends on how you wanted to use this new technique. Always remember to have fun along the way and be comfortable. It’s still smart to play-safe with this kind of endeavor instead of blindly going forward. Make sure you equip yourself with proper knowledge.

How to Find Seeds in Weed

Cannabis is so far among the most cultivated and most consumed illicit drug around the world. Many people are consuming it for medicinal reasons. Some people are also consuming it for recreational purposes. No matter what the reason may be for consuming cannabis weed, some have no idea how the products consumed are made. They also do not know where the seeds have started. 

Keep in mind that cannabis products come from somewhere in the cannabis clone or seed. Many cultivators and consumers like to know how to find seeds in weed or how do seeds start to grow in the cannabis plant. Plus, they are interested in the benefits to obtain from a high-quality seed. 

How to Find Seeds in Weed: Small and Glistening in Black, Brown, White, and Greenish

Since you are interested to know how to find seeds in weed, you will just need to pay attention to it being small and glistening in black, brown, white, and greenish. It also sometimes has small patterns on its shell. 

The seed will fall underneath the sack or bag of weed. It also stays inside the pod and the bud. Look through the bud until finally, you see the seed. Remove it carefully using your fingers or tweezers. Be extra careful so that the seed is not crushed. This is also as you taste it out of its pod using the tweezer.

Store the seeds in a dark and cool environment. This is also until the time you decide on using them. Keep it out of sunlight. Keep it out of a moist area. Seal it in such an airtight container. The oxygen will cause degradation of the seed quality. When you want to store it longer, just place it inside the fridge. It can be kept there for twenty years or so into it. Once inside the freezer or the fridge, open the freezer or the fridge just a little. This now brings in oxygen entering the fridge or the freezer. This also causes seed oxidization when not sealed properly.

If there are enough money, time, space, and privacy to grow and plans, plop the seeds between the 2 moistened paper towels. Place the towel along the seeds just sandwiched inside the plastic sandwich bangle. However, do not seal or close the bag. Just leave it open. Allow the oxygen from flowing in. Keep it in a dark and warm spot. It should be anywhere from eighty to ninety-eight degrees. Such a small taproot will come up from the cracked seed. This occurs in 2 days to about 3 weeks. Take the tweezer carefully. Transplant it to the soil. Continue it to grow. It requires you more space, time, money, privacy, and research to grow it. There will never be an exception. Just keep any of these important things in mind. 

Seeds Are In the Weed To Be Utilized by Cultivators

The Cannabis Seeds in weed will be utilized by cultivators undergoing different growing stages. This is for them to become developed completely. They will result in becoming mature cannabis plants. It depends upon the specific strain of the seed and the growing conditions used. Cultivators will reap off plenty of results coming the harvesting time. The thing about conventional Cannabis Seeds is the possession of both female and male characteristics.

Growing cannabis from the seeds demands more time for it to develop. This is as compared to the use of cannabis clones. This method enables growers of experiencing the cultivation process. This is from the start until the end. Experienced cultivators also have reported growing cannabis starting with the seeds. It then results in higher and more fruitful quality yields.

Finding seeds in weed and growing cannabis from the seeds can be quite daunting. It is a rewarding experience even if you are a novice or an experienced grower. It is good to bear in mind that the use of seeds in weed is essential for it to flourish. That way, it will reach its fullest potential. Moreover, it’s good to know what makes seeds in weed also a quality one. Below are more of the various types of Cannabis Seeds in weed.

Types of Cannabis Seeds

When you are trying to know how to find seeds in weed, it is essential to understand the 3 types of Cannabis Seeds. You will then know which one suits your growing wants and needs. The cannabis plant is capable to produce both male and female Cannabis Seeds. This is true if they have undergone such a natural process of pollination. This is also if the traditional breeding methods are utilized. The types can go as feminized, auto-flowering, and traditional.


The traditional seeds are grown to be as common. It is just that these seeds have a fifty-fifty chance of producing male cannabis plants. They contain less therapeutic and medicinal benefits than female plants. Even if conventional Cannabis Seeds are used until this day, they are somehow less efficient as compared to growing cannabis from the feminized seeds.

Feminized Seeds

The feminized seeds are bred to bring about female plants the time they are planted. They are also brought about by them possessing such no male chromosomes. The purpose of feminized seeds is that they create trichome-enriched buds. They are the ones containing various benefits. And, cannabis users are experiencing and benefiting from them.

Since you are a novice cannabis grower, make sure the seeds are female. The feminized seeds are a staple choice among cannabis growers. They save cultivators the time and growing space, too.

Auto-Flowering Cannabis Seeds

A lot of cultivators are trying to follow the most-efficient and best-growing methods. That way, high-quality and abundant yields are produced. The cannabis ruderalis is among the commonly used due to the auto-flowering abilities. This is when auto-flowering Cannabis Seeds come into existence.

Indeed, there are many benefits to obtain from incorporating the Cannabis ruderalis into home growing. The high content level of CBD of the plant gets the attention of consumers and cultivators alike.


The most important thing in learning how to find seeds in weed is by paying attention to its appearance as to small and glistening in black, brown, white, and greenish. The seeds are also in the weed to be utilized by the cultivators.

Are You 18 Or Over?



No By clicking yes, you certify that you are over 18. By using this website, you agree to our legal disclaimer.
× Chat Us with Whatsapp
RKS Close Button